The admirable authenticity of an upscale wooden garage door is very impressive when it emanates collaboration with the architectural style of a premium residence. Personalized according to the design of your home, the garage door will be synonymous with pride, aesthetics and security.
Solid wood core with raised panels
- Made in Western Red Cedar, White Oak, Douglas Fir, African and Honduran Mahogany
- 2 1/4″ thick, solid wood, in Western Red Cedar, White Oak, Douglas fir and Mahogany
- 2 1/4″ thick, veneer sub-frame with foam insulated core
- Raised, flat or “V” groove panels available
Insulated Core
- Insulated core with wood frame and 1/4″ veneer on both side
- Laminated Western Red Cedar or Honduran Mahogany planks at exterior only. The interior side may also be laminated upon request
- Large choice of designs, exterior and interior
- Any type of insulated glass is available
Brickmold or decorative options
- Wood jambs, weather-striping cover and wood decorative mouldings are available upon request
Glass
- Factory glazed with single lite or with 7/8″ double insulated glass units
- Tempered glass is standard across the United States
- Low-E, Argon filled, laminated and historical glass available
- Other options available upon request
Hardware and pre-finishes
- Ball bearing hinge
- Shaft and spring
- Weather-stripping and weather-stripping cover
- Decorative hardware available
- Door opener
Muntins
- 7/8″ Simulated divided lite (SDL) ans 1 1/4″ True divided lite (TDL) options
- With choice of colors for perimeter and internal spacer bars
Options
- Rails
- Complete weatherstripping
- Electric door operator
- Wireless Key less Entry System
- Entry pad Control
- Frame
Because our Overhead Garage doors are custom made, you can use your imagination and create your own design. We will be more than happy to satisfy your request.
Standard
 |
One insulated glass unit only. Consist of a 7/8” solid wood muntin applied on both sides (inside / outside) of the insulated glass unit with glazing tape.
Custom width and profiles are available upon request. |
SDL (Simulated Divided Lite)
 |
One insulated glass unit only. Consist of a 7/8” solid wood muntin applied on both sides (inside / outside) of the insulated glass unit with glazing tape.
An internal spacer bar aligned with the wood muntins give the appearance of the TDL. Custom width and profiles are available upon request. |
TDL (True Divided Lite)
 |
Multiple insulated glass units. Consist of a 1 1/4” solid wood muntin which divides the sash into multiple lites. Each lite get its own insulated glass unit. Custom width and profiles are available upon request. |
It is extremely important that you install our wood products within 30 days after receiving. We recommend that you install our windows and doors plumb, level and square, as the state of art. Prior to being installed, they must be kept into a heated and humidity controlled area. This is to prevent any damages that may occur if not stored properly. Wood is a living material and must be treated as such. Until you have closed the walls, you want to make sure that your windows and doors are well prepared for the tough life that they will have.
All surfaces must be painted or stained before installation. You should always take advantages of our unique paint shop. We can finish all our products piece by piece prior to assembly to give you the maximum protection and make you save time and money. You must also make sure that maintenance is done on a periodic schedule. The secret to keeping your wood products in pristine condition is to keep the finish on the wood surface in good condition and always follow the manufacturer’s recommendations.
The hardware should also be inspected periodically. Most of the hardware we supply can be easily cleaned with soap and water only. You should also lubricate the hardware with Petroleum Jelly or Lithium Grease.
